# How to Read a Water Quality Report (CCR Explained)

> A plain-English guide to your annual water quality report: what MCL, MCLG, action level and ND mean, how to spot violations, and what the CCR cannot tell you.

Source: https://puretap.mehyar.us/blog/read-water-quality-report
Published: 2026-11-17T17:31:22.836Z
Publisher: PureTap (https://puretap.mehyar.us), a MehyarSoft product

## Key takeaways

- Read the year first: a CCR covers the previous calendar year, not today's water.
- Compare your result against the MCL, and treat the MCLG as a health goal rather than a legal limit.
- Check the violation column for monitoring and reporting failures, not just health-based ones.
- The report describes your water system, not your building's pipes or your private well.

If you want to know what is actually in your tap water, start with the consumer confidence report (CCR) your water utility publishes each year. It lists where your water comes from, what was detected, and whether anything exceeded a legal limit. The hard part is the formatting: most CCRs are written for regulators, not for the person reading them at the kitchen table.

## What is a consumer confidence report?

A CCR is an annual summary of your public water system's test results. Community water systems in the U.S. publish one for the previous calendar year, usually by mid-summer, and many post it on their website as a PDF.

The EPA explains the reporting requirement in [its CCR rule overview](https://www.epa.gov/ccr).

It is not a test of your specific tap. It covers the whole system, or a service area within it, so it describes the water leaving treatment rather than the water arriving at your kitchen faucet.

That distinction matters. If you live in an older building with lead pipes or a private well, the CCR will not describe your plumbing or your well at all.

## Where do you find yours?

Three places, in order of speed:

1. Your utility's website, under "water quality" or "consumer confidence report."
2. Your annual bill insert or a mailed copy, which utilities are expected to deliver to customers.
3. The EPA's public water system data, which you can look up by the system name or by the ZIP code the system serves.

If your water comes from a private well, there is no CCR. Well testing is the owner's job.

## How to read the table without getting lost

Most of the confusion comes from three columns that look similar. Here is what each one means.

| Column | What it means | How to use it |
| --- | --- | --- |
| MCLG | The health goal: the level below which there is no known or expected health risk | A target, not a legal limit. Some contaminants have a goal of zero |
| MCL | The enforceable limit set as close to the goal as practical | If a result is above this, the system has a violation |
| Your result | The highest level detected during the year, often a range | Compare against the MCL, and read the year, not just the number |
| Range | Low to high across sampling sites | A wide range often means older pipes or specific zones |

Two more terms appear often. An action level is used for contaminants like lead and copper, where the trigger is a treatment requirement rather than an outright limit. A treatment technique is a required process, such as filtration, where compliance is judged on the process rather than a single number.

### What does "ND" mean?

ND stands for not detected at the reporting limit. It does not mean zero. It means the lab could not find the contaminant above the smallest amount its method can reliably measure, which is usually a very small amount.

That is still good news in most cases, but it is not a guarantee of absence.

## What counts as a violation?

There are a few different kinds, and they do not carry the same weight.

- **Health-based violations**: a result above an MCL, or a required treatment step not performed.
- **Monitoring violations**: the system failed to sample when or where it was required. The water may be fine, but nobody checked.
- **Reporting violations**: the CCR was late, incomplete, or never delivered.

A monitoring violation is often the one people overlook, because the report may show no bad numbers while quietly noting that some sampling was missed.

## What a CCR cannot tell you

It will not tell you about your building's internal plumbing, your private well, or the water in a school or workplace served by a different system. It also will not tell you what a specific contaminant means for your health, because that depends on your own circumstances.

If you have a medical condition, are pregnant, formula-feed an infant, or are renovating an older home, that is a conversation with a doctor or your utility, not a conclusion drawn from a table.

This article is general information, not medical or legal advice.

## A five-minute reading routine

1. Check the year the report covers. A 2024 report describes 2023 water.
2. Find the system name and the source water line: groundwater, surface water, or a mix.
3. Scan the violation column for anything other than "none," then read the explanation underneath.
4. Look at lead and copper results, especially if your home was built before lead solder was phased out.
5. Read the "health effects" language for any contaminant that exceeded a goal, and note whether it is above the legal limit or only above the goal.
6. Check whether the utility noted any monitoring gaps.

Steps three and six are where most real answers live. The rest is context.

## When to dig deeper

Dig deeper if your system shows a health-based violation, repeated monitoring failures, or a contaminant above its goal for several years in a row. Also dig deeper if the CCR is more than two years old, which suggests a reporting problem rather than a clean year.

If you just want the short version, you can get a free 60-second Safe, Caution, or Violations verdict for your ZIP at [PureTap](/) and read the system's record without parsing a PDF. The free tier is a verdict, not a full analysis; the $19 report decodes the complete violation record into action steps and includes a PDF. Neither one tests your water, and neither promises a health outcome.

## What to keep

Save the PDF somewhere you will find it again, and note the system name and PWSID on it. If you ever move, compare the new system's report against the old one. Two years of CCRs side by side tell you more about trend than any single report does.


## Frequently asked questions

### Is a consumer confidence report the same as a water test of my home?

No. A CCR summarizes the public water system's results, not the water at your tap. Plumbing, filters, and private wells are outside its scope.

### What is the difference between an MCL and an MCLG?

The MCLG is the health goal, and the MCL is the enforceable limit set as close to that goal as is practical. A result can be above the goal while still being legal.

### Why does my report say ND instead of zero?

ND means not detected at the reporting limit. The lab found nothing above the smallest amount it can reliably measure, which is not the same as proving the contaminant is absent.

### My report is two years old. Is that a problem?

It may be. CCRs are meant to be published annually, so an old report can point to a reporting or posting problem. Ask the utility for the current year.

---
About PureTap: Is your tap water safe? Enter your ZIP and get a free tap-water safety verdict drawn from official EPA data. $19 one-time unlocks the full decoded water report — every contaminant explained in plain English, with what each finding means and what to do… Pricing: $19 report · free ZIP verdict.
